Risco LightSYS - Maintenance and Testing

User Functions and Settings
LightSYS User Manual Page 42
Operation
GM
U
En.
Scheduler
√
-
√
Weekly — Enables you to define up to four weekly programs
with up to two time intervals per day, during which the system
automatically sets/unsets, activates programming output , or
prevents users from unsetting.
One Time — Enables a one time operation of automatic
Set/Unset of the system at a specific time within the next
24 hours.
Schedule Enable — Enables to activate or deactivate predefined
schedules.
Vacation
√
-
√
Enables defining up to 20 holiday periods and the partitions that
will be set automatically during the holiday.
Event Log
√
-
√
Allows the viewing of significant system events including date
and time.
Notes:
The events memory cannot be erased.
To skip 10 event at a time backward or forward use the and
keys consecutively.
Maintenance
Walk test
√
-
√
Enables to easily test and evaluate the operation of selected zones
in your system. Walk test is set for up to 60 minutes. During the
last five minutes of walk test mode, the keypad used to perform
the walk test will indicate that the walk test period is about to
end.
Full walk test — The test displays the detected zones and type
of detection.
Quick walk test —The test displays the undetected zones.
Keypad test
√
-
√
Momentarily tests the keypad indicators.
Sounder test
√
-
Activates the squawk sound in the selected sounder.