Risco LightSYS - Page 41

User Functions and Settings
Page 41 LightSYS User Manual
Operation
GM
U
En.
Partition Status
√
√
√
Displays the partitions' status, the faults in the system and all
“not ready” zones.
Pressing on the key from the normal operation mode
displays the status of the partition to which the keypad is
assigned. Pressing the sequence [CODE] from the normal
operation mode displays the status of all the partitions assigned
to the user code.
Zone Status
√
√
√
Allows the display of all system zones and their current status.
Service Info
√
√
√
Allows the display of any previously entered service information
and the system version
IP Address
√
-
√
Use this option to view the IP address of the LightSYS. This
option is available only if IP module is defined in the system
Codes/Tags
Define
√
√
-
Codes:
Edit Code— Use this menu to edit user codes in the system. (See page 27.)
Erase Code — Use this menu to delete user codes in the system
Proximity Tag:
(Re)write Tag— Assigns user codes to proximity tags.
For detailed information refer to page 29.
Delete Tag— Deletes a proximity tag of the selected user.
Edit Label — Assigns labels to users (16 characters long).
These labels are presented in the event log.
Delete By Tag
√
-
-
Use this option to delete a proximity tag when the user of the tag
is unknown.
Clock
Time & Date
√
-
√
Allows the setting of the system time and dates, as described on
page 30. This definition is required for setting the scheduler
programming in the system.