Rishabh RISH Master 3440 - 3.2.4.1.1 Relay1 output Selection menu:; 3.2.4.1.1.1 Pulse output:; 3.2.4.1.1.2 Limit output:

3.2.4.1.1 Relay1 output Selection menu :
This screen allows the user to quit the output option
Pressing “ Up” key will advance to the
Pressing the “ Down” key will go back to
(See section 3.2.4)
Output Parameter selection
Relay1 output option (See section 3.2.4.1).
This screen is used to assign Relay1 in Pulse
Pressing “ Down” key will show “Limit”output option
(See section 3.2.4.1.1.2)
Pressing “ Up” key will advance to the Pulse
(See section 3.2.4.1.1.1.1)
(for Relay1) output configuration
output mode.
3.2.4.1.1.1 Pulse output :
VYB
VRY
KVAr
Sys
V
A
KVA
Min
KW
VBR
Angle
Max
x1000
KVArh
x1000
x1000
IN
Ph R
Hz
KVAh
Ph Y
P.F.
KWh
Ph B
KAh
%THD
Demand
V
x1000
VRY
KVAr
KVArh
IN
Sys
Ph R
KAh
A
x1000
VYB
KVA
Hz
KVAh
Min
Ph Y
Demand
KW
x1000
VBR
Angle
P.F.
KWh
Max
Ph B
Max Demand
V
x1000
VRY
KVAr
KVArh
IN
Sys
Ph R
KAh
A
x1000
VYB
KVA
Hz
KVAh
Min
Ph Y
%THD
KW
x1000
VBR
Angle
P.F.
KWh
Max
Ph B
Demand
This screen is used to assign Relay1 in limit output mode.
Pressing “ Down” key wil go back to the pulse option
(For Relay 1) screen.(See section 3.2.4.1.1.1)
Pressing “ Up” key will assign
(See section 3.2.4.1.1.2.1)
Limit (for Relay1) output mode.
3.2.4.1.1.2 Limit output :
V
x1000
VRY
KVAr
KVArh
IN
Sys
Ph R
KAh
A
x1000
VYB
KVA
Hz
KVAh
Min
Ph Y
Demand
KW
x1000
VBR
Angle
P.F.
KWh
Max
Ph B
Max Demand
V
x1000
VRY
KVAr
KVArh
IN
Sys
Ph R
KAh
A
x1000
VYB
KVA
Hz
KVAh
Min
Ph Y
%THD
KW
x1000
VBR
Angle
P.F.
KWh
Max
Ph B
Demand
35