Rishabh RISH Master 3440 - Page 4

3.2.4.1.1 Relay 1 output selection menu
3.2.4.1.1.1 Pulse output
3.2.4.1.1.1.1 Assignment of Energy to Pulse (Relay 1)
3.2.4.1.1.1.2 Pulse Duration Selection
3.2.4.1.1.1.3 Pulse Rate
3.2.4.1.1.2 Limit output
3.2.4.1.1.2.1 Assignment of Limit Output1 to Parameter
3.2.4.1.1.2.2 Limit Conguration
3.2.4.1.1.2.3 Trip point selection
3.2.4.1.1.2.4 Hysteresis selection
3.2.4.1.1.2.5 Energizing delay time
3.2.4.1.1.2.6 De-energizing delay time
3.2.4.1.2 Relay 2 output selection menu
3.2.4.1.3.1 Parameter setting for Analog Output-1
3.2.4.1.3.2 Parameter setting for Analog Output-2
3.2.4 Output Option selection screen (menu)
3.2.3.1 Resetting Parameter
6.
Number of Interruption
Relay Output
8.
5.
On - Hour.
4.
Phase Rotation Error screen.
7.
Analog Output
Pulse output
8.1
Limit switch
8.2
3.2.3 Reset Parameter selection screen
3.2.4.1 Conguration of Output
3.2.4.1.3 Analog Output Selection
2