Troubleshooting Tips
RisoHoldManager
57
Even though you have "Preview Job
Pages" selected, a preview or
detailed information on the job does
not appear.
Have you sent the file to the storage
memory using the correct printer
driver for the RISO printer?
Use a suitable driver and send to the
storage memory by selecting "Print &
Storage" or "Storage Only" from
"Destination" in [Output]. Also, there
are a few cases where previews do
not appear for RISORINC-format
document files held in the storage
memory.
Is the authentication set for the job? The authenticated job is not
displayed in RISOHoldManager.
Problem Cause Condition and Action
To Next Page
Loading...