Riso SF5 Series - Page 50

48
Chapter 2 Working with the Printer Driver
48
Chapter 2 Working with the Printer Driver
4
Pages/sheet
When [Multi-up] or [Page layout] is selected, select the number of pages.
2pages: Imposes 2 original pages on a sheet.
4pages: Imposes 4 original pages on a sheet.
5
Layoutorder
When [Page layout] is selected, select the imposition order and opening direction.
Pagelayout(2pages)
Lefttoright(Toptobottom) : Original pages are imposed from left to right or from top to bottom.
Righttoleft(Bottomtotop) : Original pages are imposed from right to left or from bottom to top.
Pagelayout(4pages)
Lefttoptoright : Original pages are imposed from left top to right.
Lefttoptobottom : Original pages are imposed from left top to bottom.
Righttoptoleft : Original pages are imposed from right top to left.
Righttoptobottom : Original pages are imposed from right top to bottom.
6
Bindingside
Setting the binding margin.
OFF : A binding margin is not set.
Left : The binding margin is set on the left side of the sheet of paper.
Right : The binding margin is set on the right side of the sheet of paper.
Top : The binding margin is set on the top of the sheet of paper.
Bottom : The binding margin is set on the bottom of the sheet of paper.
Details : Clicking [Details] opens the [Binding side] dialog box.
Set the binding margin and the unit.
When a checkmark is placed in the [Auto reduce] checkbox, the page size is automatically reduced if the
original page size is not within the print paper.