Riso SF5 Series - Page 54

52
Chapter 2 Working with the Printer Driver
52
Chapter 2 Working with the Printer Driver
3
Lineartstyle
Species the expression method of the line (text).
Grain-touch : This mode displays the color gradation. The bright color is printed out in light tone and the dark
color is printed out in deep tone.
Screen-covered : The text sections are displayed with halftone dots. This mode is unsuitable for small sized text.
Solid-look : This mode makes all text solid-look. You can use this mode to express the text clearly. The
difference of each text color cannot be expressed.
4
Textstyle
You can adjust the thickness of text in this mode.
Bold : makes the text thicker and print out (to prevent patchiness).
Slim : makes the text slimmer and print out (to prevent crushed lines).
OFF : doesn’t adjust the text volume.
5
Color
[Basic] Tab - [Color] (
A
45)
6
Colorinformation
[IPaddressoftheprinter]onthe[Environment]tab(
A
33)mustbeset.
By clicking on the [Refresh] button the color information of the Drums mounted in your RISO printer will be reected in
the RISO Printer Driver. The acquisition status (Complete/Error) of color information is displayed. In case of “Complete”,
the letters in the Ink Color of the printer driver will be indicated in blue.
B
Print image: According to the settings of each [Photo type], [Line art style] and [Text style], the image of the documentation
data and print will be displayed.
The actual documentation data and prints are different from the displayed images.