RKI Instruments SP-220 TYPE F User Manual

- 29 -
5-2. Measured gas reading setting
Normally, the concentration display of the detector is "Isobutane (R600a)" depending on the specification;
however, a pre-registered gas can be read instead to detect its concentration.
1
On the "GAS LIST"
screen in the display
mode, press the POWER
button.
The detector enters the gas
reading setting.
▼
The currently set gas name is
displayed.
2
Press the MODE or AIR
button to select a gas
name to be read
instead.
The gas name switches to
another every time the button is
pressed.
3
When the target gas
name is displayed,
press the POWER
button.
"END" is displayed, returning to
the display mode.

RKI Instruments SP-220 TYPE F Specifications

General

Brand	RKI Instruments
Model	SP-220 TYPE F
Category	Security Sensors
Language	English