RKI Instruments SP-220 TYPE F User Manual

- 35 -
6-2. Date/time setting
Set the date/time of the internal clock.
The date/time setting screen is displayed only when the clock function is enabled. Enable the clock function
in "6-3. Clock function ON/OFF setting" on page 36 before setting the date/time.
1
On the "DATE" screen in the user
mode, press the POWER button.
The detector enters the date/time setting.
2
Press the MODE or AIR button, set
the date/time and press the POWER
button.
3
Set year -> month -> day -> hour ->
minute in this order.
When the "minute" value is confirmed, "END" is
displayed and then the detector returns to the
user mode menu.

RKI Instruments SP-220 TYPE F Specifications

General

Brand	RKI Instruments
Model	SP-220 TYPE F
Category	Security Sensors
Language	English