EasyManuals Logo

RKI Instruments SP-220 TYPE F User Manual

RKI Instruments SP-220 TYPE F
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
- 54 -
10
9. Storage and Disposal
10-1. Procedures to store the detector or leave it for a
long time
The detector must be stored under the following environmental conditions.
• In a dark place under the normal temperature and humidity away from direct sunlight
• In a place where gases, solvents, vapors, etc. are not present
Store the detector in a shipping carton, if any, in which the product was delivered.
Store the detector away from dust, etc. if the shipping carton is not available.
10-2. Procedures to use the detector again
CAUTION
When the detector is used again after a long-period storage, never fail to perform a calibration.
Contact RKI for information on readjustment including calibration.
CAUTION
If the detector is not used for a long time, store it after removing the batteries. Leaks from dry
batteries may result in fire or injury.
The detector, when not activated for a long time, may cease to work because of hardening of
the grease in the pump motor.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RKI Instruments SP-220 TYPE F and is the answer not in the manual?

RKI Instruments SP-220 TYPE F Specifications

General IconGeneral
BrandRKI Instruments
ModelSP-220 TYPE F
CategorySecurity Sensors
LanguageEnglish

Related product manuals