RKI Instruments SP-220 TYPE F - Page 52

- 52 -
3
The AIR CAL menu item
will be displayed.
4
Use the AIR or MODE
button to scroll to the
PASSWORD menu item.
5
Press and release the
POWER button. The
current setting will be
displayed.
6
Use the AIR or MODE
button to adjust the
on/off setting. If the
password is set to on, a
user-defined password
will be required to enter
Calibration Mode.
7
Press and release the
POWER button.
If you set the password
function to off,
continue to step 9.
If you set the password
function to on, continue
to step 8.
8
Use the AIR or MODE
button to adjust the
first number in the
desired password.
Press and release the
POWER button to move
on to the next
character and then
save the password.