Robin R1210 Brushless User Manual

RG-32
S E R \/I C E
NEWS
September-1995
Rk Generators
@ FUJI HEAVY INDUSTRIES LTD.
INDUSTRIAL PRODUCTS DIV.
I
MODEL
I
SUBJECT
I
R1210
Oil Sensor change
This Service News is to inform of the change of the oil sensor and wiring equipped with
the ROBIN engine EY 15 for R1210 generator set.
1. Purpose
To improve the performance of the oil sensor.
2. Main points of the modification
1) The oil level sensing mechanism of the oil sensor is changed from piezo-resonator
type to potentiometer type.
2) The electric wiring and clamp are also changed.
3. Change of part number -
For the detail, refer to the attached figures.
New Parts set
NO. Part Name
Part number
1. Oil sensor CP.6
KS3-11015-01
+?k
2.
Wire 7 CP.
227-73 107-O 1 1
3. Clamp
056-60002-50
1
Current parts set
NO. Part name
Parl number
Q’tv
4.
Oil level sensor CP.
227-76035-01
1
5.
Wire 22 CP.
214-73122-01
1
6.
Clamp CP.
206-75501-01
1
Interchangeability
It is interchangeable only when the all parts are replaced as a set; that is to say,
the current parts set (item NO.4 to 6) can be replaced with new parts set (item NO. 1
to 3).
However, there is no interchangeability for the individual part.
4. Execution
This oil sensor change is adopted to the new ROBIN generator set to be produced in
and after September 1995.
-1-

Robin R1210 Brushless Specifications

General

Brand	Robin
Model	R1210 Brushless
Category	Portable Generator
Language	English