Chapter 5-3
Setting the Weekly Program (RL2000 only)
5.4 Weekly Program Display
You may wish to see the weekly program set
for Robomow. There are two possible ways
to do this. Remove the Manual Controller
from its holder and follow the steps in the
drawing:
Option 1 – Using Manual Controller
) Remove the Manual Controller
from its holder
) Follow the following steps to
display the weekly program:
Option 2 – If Robomow is in Base
Station:
) Scroll once for a 10
seconds display of the weekly
program.
The + sign indicates an active day
TIP: Pressing the
button
again within the 10 seconds of the
display is a shortcut to the ‘Weekly
program’ setting display:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
