Introduction - 5
Introduction
32. Replace worn or damaged parts for safety;
33. Use only the original equipment and accessories. It is not permitted to modify the original design of Robomow
. All modifications
are made at your own risk.
34. Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric
shock, overheating or leakage of corrosive liquid from the battery;
35. Maintenance/ Servicing of Robomow
should be according to manufacturer instructions;
36. A spark may be created when inserting the power pack or fuse to the robot. Therefore it is forbidden to perform these tasks close
to flammable materials. It is also forbidden to use spray or any other cleaning materials for cleaning electronic contacts, due to this
risk of inflammation when inserting the power pack or fuse.
Product end of use
37. Robomow
and its accessories should be collected separately at the end of their life to prevent waste electrical and electronic
equipment from ending up in landfill sites, to promote the reuse, treatment and recovery of electrical and electronic equipment
in purpose to preserve, protect and improve the quality of the environment, protect human health and utilize natural resources
prudently and rationally.
38. Do not dispose Robomow
or any other part of it (including the Charger, Base Station and Perimeter Switch) as unsorted municipal
waste – it should be collected separately.
39. Ask your local distributor/dealer about return and collection systems available.
40. Do not dispose of the battery pack in a fire and do not place used batteries in your household trash. The battery must be collected,
recycled, or disposed of in an environmentally sound manner.
Robomow
®
- Safety Features
1. Child Guard / Safety Guard
This menu option offers a safety feature to help prevent children or others not familiar with the safe operation of the mower to
operate it freely.
2. Lift Sensor
There is a sensor located on the front of the mower. In the event the mower is raised from its resting position on the ground
during blade operation, the blades will stop rotating immediately (< 1 second).
3. Sensor Equipped Bumpers
The front and rear bumpers are equipped with contacts that will activate when the mower strikes a solid, fixed object. When the
bumper sensor is activated, the mower stops the blades immediately and reverses itself away from the obstacle.
4. Emergency Stop Switch
The STOP button is located on the Manual Controller. Pressing this button at any time during operation will stop all mower
movement and the rotation of the blades immediately.
5. Two-Step Operator Presence Control
While in manual mode, it requires two independent finger actions in order to engage the mower blades. Once engaged, the
mower blade button must remain depressed to continue blade operation. Once released, the two-step engagement process must
be repeated.
6. Sealed Batteries
The batteries that operate the Robomow
are completely sealed and will not leak any type of fluids, regardless of position.
7. Perimeter Switch and Perimeter Wire
The Robomow
cannot operate without a perimeter wire installed and activated through the Base Station/ Perimeter Switch. In
the event the Perimeter Switch is turned off or otherwise fails to function, the Robomow
will stop operating.
8. Automatic departure warning alert
When the mower is scheduled to depart the Base Station automatically per a scheduled time, a warning sound and the operating
lamp will activate 5 minutes prior to departure. This is a warning notification to clear and inspect the area.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
