Robustel GoRugged M1000 User Guide
RT_UG_M1000 Standard_v.2.0.0 20.12.2013 47 / 83
Confidential
2. Test AT commands. Here we send “AT” then modem will reply “OK”.
Note:
1. Please disconnect the COM connection, after that switch from Config Mode to Normal Mode, and then and then
connect again to the COM.
2. Receive windows is a simple Hyper Terminal Emulator.
In this tab, user could also set “auto-answer” for CSD communications.
It is much easier to activate Auto-answer using Modem Configurator.
Input the number of rings, for example input 1, and then click “Rings Auto-answer”.
If there is an incoming CSD call, modem will auto answer after 1 ring tone.
To Next Page
Loading...
