Robustel GoRugged M1000 - Page 75

Robustel GoRugged M1000 User Guide
RT_UG_M1000 Standard_v.2.0.0 20.12.2013 74 / 83
Confidential
*address3 - write phone number address
*address4 - SMS content address
*address5 - read phone number address
*address6 - SMS received date address
*address7 - SMS received content address
1025
Set Coil Parameters
cmd,index,content1,content2,group
index: 1 - 8
*content1: on message (max 70 bytes)
*content2: off message (max 70 bytes)
group: 1 - 10 (phone group)
1026
Set Register
Parameters
cmd,index,name,max,min,group
index: 1 - 15
*name: register's name
max: max value (0 - 65535)
min: min value (0 - 65535)
group: 1 - 10 (phone group)
1027
Set DI Parameters
cmd,mode,filtering,trigger,active,flag
,message1,message2,group
mode:
1 - OFF
2 - ON
3 - ONChange
4 - Event Counter
5 - Null
filtering: (0 - 10000)
*trigger: (0 - 30000)
*active:
0 - Lo to Hi
1 - Hi to Lo
*flag
0 - disable counter start when power on
1 - enable counter start when power on
*message1: alarm on message (max 70
bytes)
*message2: alarm off message (max 70
bytes)
*group: 1 - 10 (phone group)
1028
Set DO Parameters
cmd,flag,onAction,offAction,flag1,ke
epOn
flag: xxxx (binary format: 000 - 111)
flag.0 :
0 - disable DI alarm control DO output
1 - enable DI alarm control DO output
flag.1:
0 - disable SMS control DO output
1 - enable SMS control DO output
flag.2 :