Robustel GoRugged R3000-3P User Manual

Robustel GoRugged R3000-3P User Guide
50
Click “Export” you can export the TA file from router to your PC.
CRL
Click “Browse” to select the correct CRL file from your PC, and then click “Import”
to import it to the router.
Click “Export” you can export the CRL file from router to your PC.
Null
Pre-Share Static Key
Click “Browse” to select the correct Pre-Share Static Key file from your PC, and
then click “Import” to import it to the router.
Click “Export” you can export the Pre-Share Static Key file from router to your PC.
Null
3.21 Configuration -> GRE
This section allows users to set the GRE parameters.
GRE
Item
Description
Default
Enable
Click to enable GRE (Generic Routing Encapsulation). GRE is a
protocol that encapsulates packets in order to route other protocols
over IP networks.
Disable
Remote IP Address
Set remote IP Address of the virtual GRE tunnel.
Null
Local Virtual IP
Set local IP Address of the virtual GRE tunnel.
Null
Remote Subnet
Add a static route to the remote side’s subnet so that the remote
network is known to the local network.
Null
Remote Subnet Mask
Set remote subnet net mask.
Null
Enable NAT
Tick to enable NAT Traversal for GRE. This item must be enabled
when router under NAT environment.
Disable
Secrets
Set Tunnel Key of GRE.
Null

Robustel GoRugged R3000-3P Specifications

General

Brand	Robustel
Model	GoRugged R3000-3P
Category	Network Router
Language	English