Robustel GoRugged R3000-3P - 3.14 Configuration -> USB

Robustel GoRugged R3000-3P User Guide
34
3.14 Configuration -> USB
This section allows users to set the USB parameters.
USB
Item
Description
Default
Enable automatic update
of configuration
Click Enable to automatically update the configuration file of R3000-3P when
insert the USB storage devices which has R3000-3P’s configuration file.
Disable
Enable automatic update
of firmware
Click Enable to automatically update the firmware of R3000-3P when insert
the USB storage devices which has R3000-3P’s firmware.
Disable
Note: Users can insert an USB storage device, such as U disk and hard disk, into the router’s USB interface, if there is
configuration file or firmware of R3000-3P inside the USB storage devices, R3000-3P will automatically update the
configuration file or firmware. We will provide another file to show how to do USB automatic update.