Robustel GoRugged R3000-3P User Guide
68
One router has at most 9 common user accounts. There are two access level of
common user account: “ReadWrite” and “ReadOnly”.
Select from “ReadWrite” and “ReadOnly”.
ReadWrite: Users can view and set the configuration of router under this level;
ReadOnly: Users only can view the configuration of router under this level
Set Username and Password.
Click this button to add a new account.
3.35 Administration -> Clock
This section allows users to set clock of router and NTP server.
Router’s RTC can be showed and modified in this field.
You PC’s time can be showed here.
Synchronize router’s RTC with PC.
Click enable to enable NTP client which can synchronize the time from NTP
server.
Select your local time zone.
Enter primary NTP Server’s IP address or domain name.
Enter secondary NTP Server’s IP address or domain name.
Enter the interval which NTP client synchronize the time from NTP server.
Click to enable the NTP server function of router.
Select your local time zone.
To Next Page
Loading...
Need help?
General
