Robustel GoRugged R3000-3P User Manual

Robustel GoRugged R3000-3P User Guide
53
L2TP Server @ L2TP
Item
Description
Default
Enable L2TP Server
Tick to enable L2TP server.
Disable
Username
Set the username which will assign to L2TP client.
Null
Password
Set the password which will assign to L2TP client.
Null
Authentication
Select from “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
L2TP client need to select the same authentication method based on this
server’s authentication method.
CHAP
Enable Tunnel
Authentication
Tick to enable tunnel authentication and enter the tunnel secret which will
provide to L2TP client.
Disable
Local IP
Set the IP address of L2TP server.
10.0.0.1
IP Pool Start
Set the IP pool start IP address which will assign to the L2TP clients.
10.0.0.2
IP Pool End
Set the IP pool end IP address which will assign to the L2TP clients.
10.0.0.100
Show L2TP Server
Advanced
Tick to show the L2TP server advanced setting.
Disable
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable

Robustel GoRugged R3000-3P Specifications

General

Brand	Robustel
Model	GoRugged R3000-3P
Category	Network Router
Language	English