W W W.ROCCAT.ORG / SUPPORT
CONfiGURATiON mENU
You can either launch the configuration menu for
the Valo keyboard by clicking Start > Programs
> ROCCAT > Valo Keyboard > Valo Driver or by
double clicking the ROCCAT symbol on the right
in the taskbar. Please note that each ROCCAT
product you’ve installed will have its own ROCCAT
logo in the taskbar. Hover the mouse over the
symbols to display the name of each product – this
mAiN CONTROL
The ‘Main Control’ tab in the configuration menu provides you with information on the functions of the
macro and additional keys and allows you to reassign functions to macro keys.
For instance, you can switch the functions of the Mrec and Esc keys so that you don’t accidentally press
the Mrec key instead of the Esc key out of habit.
Note: As soon as you’ve configured a setting you can assign the function to the keyboard by clicking the
‘Apply’ button without having to exit the ROCCAT menu. It may take a few seconds until the information is
transferred to the keyboard.
Once you’re done configuring the keyboard settings, click ‘Ok’. You can exit the configuration menu by
clicking ‘Cancel’.
will allow you to differentiate between the drivers.
To Next Page
Loading...
