23
Control Tests
4
Wipe the tip of the bottle
with a tissue. Cap the
bottle tightly.
Remove and discard the
used test strip.
NOTE
• Most people just test the Level 1 control.
If you wish, you can also test a Level 2
control. A set of Level 1 and Level 2
control solutions is available for
purchase.
• The ranges for Level 1 and Level 2
control solutions are printed on the test
strip container label.
• The meter turns o 90 seconds after a
successful test or 15 seconds after the
test strip is removed, provided no other
action is taken.
Understanding Out‑of‑Range Control
Results
WARNING
The control range applies only to a
control result. It only indicates that the
test strips and meter are working
properly. Do not use a control result to
interpret blood glucose results.
If the control result is out of range, do
not use the meter until you solve the
problem. Check the following list to
help solve the problem.
82052_08100918004.indd 23 6/9/2020 12:07:15 PM
To Next Page
Loading...
