Roche Accu-Chek Guide User Manual

42
Wireless Communication and Meter Pairing
7
First‑Time Pairing
The steps below are for first-time pairing.
Up to 5 devices can be paired with the meter
at any time.
Each device must be paired with the meter
one at a time.
The meter and the device to be paired should
be within 3 feet of each other.
1
Prepare the device for pairing. Refer to the
device’s instructions for information about
pairing.
2
Turn the meter on by
briefly pressing
. From
Main Menu, press
to
highlight Settings. Press
.
3
Press to highlight
Wireless. Press
.
4
Pair Device appears. To
pair a device, press
to
highlight Yes. Press
.
5
The meter displays its
code.
6
The mobile device displays a list of found
devices, including the meter. Select the
meter from the list. When prompted, enter
the code displayed on the meter from
Step 5 into the device to be paired.
7
When pairing is complete,
and the name of the
paired device appear.
Press
to return to the
previous menu.
Flight Mode
Select whether wireless communication is
available or not. When Flight Mode is on,
appears in the title bar and wireless
communication is not available.
1
Turn the meter on by
briefly pressing
. From
Main Menu, press
to
highlight Settings. Press
.
2
Press to highlight
Wireless. Press
.
82052_08100918004.indd 42 6/9/2020 12:08:10 PM

Roche Accu-Chek Guide Specifications

General

Brand	Roche
Model	Accu-Chek Guide
Category	Blood Glucose Meter
Language	English