The meter has the following elements:
1. Test strip port
Insert the test strip here.
2. Touchscreen
(touch-sensitive display)
This screen allows you to perform
patient tests, perform controls
tests, and review results. To select
any of these functions, simply
touch the button on the screen.
3. On/Off button
Press this button to turn the meter
on or off. In addition, you can
activate or deactivate the backlight
with this button.
4. Barcode scanner (laser)
The integrated barcode scanner
can be used to read operator and
patient IDs.
5. Battery Pack
Powers the device.
6. Reset button
Use this button to reset the device.
Reset will not alter configuration.
7. Charging contacts
These contacts are used to charge
the battery when the meter is in
the base unit.
8. Infrared interface
Facilitates data communication
with code key reader and base unit.
9. Cover for RF card
If your meter is equipped with this
option, the RFcard for the wireless
network (WLAN) is located behind
this cover.
About the
8
User Guide
To Next Page
Loading...
