139
These maintenance messages may appear on
the display. They have the meanings shown:
Maintenance
Date is invalid. Enter correct
time and date.
Invalid Date [M-21]
19 Jul 2018 10:10 AM
Maintenance
Test strip has expired. Use a
valid test strip.
Test Strip Expired
[M-22]
19 Jul 2018 10:10 AM
Maintenance
Barcode on test strip cannot
be read. Repeat test with a
new test strip.
Test Strip Error [M-23]
19 Jul 2018 10:10 AM
Maintenance
Meter does not recognize test
strip. Repeat test with a new
test strip.
Test Strip Error [M-24]
19 Jul 2018 10:10 AM
Maintenance
Code chip is invalid. Replace
with a valid code chip.
Invalid Code Chip
[M-25]
19 Jul 2018 10:10 AM
Maintenance
Test strip removed during test.
Repeat test with a new test
strip.
Test Strip Error [M-26]
19 Jul 2018 10:10 AM
Maintenance
Test strip guide cover
removed during test. Close
cover and repeat test.
Cover Open [M-27]
19 Jul 2018 10:10 AM
Maintenance
USB cable plugged in during
test. Remove USB cable and
repeat test.
USB cable plugged
[M-28]
19 Jul 2018 10:10 AM
Symbols, Icons, Messages
CoaguChek Vantus User’s Manual, version 1.0