Rocket DOPPIA 2GR - Cup Warmer; Programming; Menu Access; Services Boiler

USER'S MANUAL
15 of 28
6.8 Cup warmer
For safety reasons, it is recommended not to place
cloths or other objects on the upper surface of the
machine to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the upper surface
of the machine can reach temperatures that can
cause burns. Pay close attention.
The machine does not have a cup warmer, but cups can be
placed on the top of the machine to keep them warm.
7. PROGRAMMING
7.1 Menu access
• To access the programming menu, press the buttons
and
in quick succession;
• The programming menu appears in the machine display;
menu 1/2
services boiler 1.20
coffee boiler 92.0
pre-infusion 1.0
date and time
calendar
menu 2/2
language
settings
WI-FI
lter
• To scroll through the various areas of the programming
menu, press
, the value of the selected item turns red;
• To enter a menu item, press and hold
;
• to switch from one parameter to another within the same
area, use the key
,
• To change the value of each parameter, use the two keys
increase and decrease;
• the new values entered are saved automatically;
• to return to the main menu, press the key
;
Decrease ( - )
Increase
( + )
Enter
Stop
Programm.
YOU can view the display from any smartphone/
tablet by connecting to the internet page via
WI-FI, see 7.8 on page 17.
The system automatically exits the program-
ming phase approximately 20 seconds after the
last executed operation. For programming, al-
ways use the button panel of the rst group.
The machine may have a different menu. This is
due to the different version of the software in-
stalled in the machine; it can sometimes hap-
pen that the software is also updated during
maintenance to improve performance.
7.2 Services boiler
This menu allows programming the boiler pressure for steam
delivery.
• Enter programming and scroll through the menu by press-
ing
until highlighted on the display:
services boiler 1.20
• press and hold to enter the entry;
• set the boiler pressure (values from 0.0 to 1.5 bar) using
the buttons
and ;
• To exit, press
, the parameters entered are automati-
cally saved.
7.3 Coffee boiler
This menu allows to set the temperature of the main coffee
dispensing unit.
• Enter programming and scroll through the menu by press-
ing
until highlighted on the display:
coffee boiler 92.0