Rocket DOPPIA 2GR - Glossary and Pictograms; Warranty; Machine Identification; Make and Model Designation

USER'S MANUAL
6 of 28
1.5 Glossary and Pictograms
This section lists terms that are uncommon or otherwise have
a meaning other than common.
The abbreviations used, and the meaning of the pictograms
to indicate operator qualication and machine status, are
explained below. Their use makes it possible to quickly and
unambiguously provide the information necessary for the ma-
chine to be used correctly and safely.
1.5.1 Glossary
User
Person in charge of operating the machine and carrying out
the routine cleaning operations indicated in this manual.
Technician
Specialised person, specically trained and qualied to carry
out the following operations in accordance with the regula-
tions in force: transport and handling, storage, installation,
commissioning, maintenance, decommissioning, dismantling
and disposal of the machine.
Hazard
Potential source of injury or damage to health.
Danger zone
Any zone within and/or around machinery in which a person
is subject to a risk to his health or safety.
Risk
Combination of the probability and the degree of an injury
or damage to health that can arise in a hazardous situation.
Guard
Part of the machinery used specically to provide protection
by means of a physical barrier.
Personal protective equipment (PPE)
Equipment worn or held by the person for the protection of
health or safety.
Intended use
Use of machinery in accordance with the information provid-
ed in the instructions for use.
User qualication
Minimum level of skills the operator must possess to perform
the described operation.
Machine status
The machine status includes the operating mode and the
condition of the safety devices on the machine.
Residual risk
Risks that remain despite the inherent safe design measures,
safeguarding and complementary protective measures adopted.
Safety component:
• Intended to perform a safety function;
• the failure and/or malfunction of which endangers the
safety of persons.
1.5.2 Pictograms
Descriptions preceded by these symbols contain very important
information/prescriptions, particularly with regard to safety.
Failure to comply can result in:
• dangers to the safety of those working on the machine;
• even serious injuries to the user (in some cases even
death);
• loss of the contractual warranty;
• manufacturer's liability disclaimer.
GENERAL HAZARD symbol used in the event of
danger of permanent serious injury, requiring hos-
pitalisation, in extreme cases causing death.
ELECTRIC HAZARD symbol used in the event of
danger of permanent serious injury, requiring hos-
pitalisation, in extreme cases causing death.
HIGH TEMPERATURE HAZARD symbol used in
case of danger of permanent serious injury, requir-
ing hospitalisation, in extreme cases causing
death.
CAUTION symbol used in case of danger of injury
that is not serious but requires medical care by
professionals.
WARNING symbol used in case of danger of minor
injury that can be treated with rst aid or similar
measures.
NOTE symbol used to provide important informa-
tion related to the subject matter.
Symbol for Mandatory Use of Protective Gloves,
used in the event of danger of permanent serious
injury requiring hospitalisation.
Symbol of Obligation to read the documentation,
used to make the user aware of the importance of
this action for his safety.
1.6 Warranty
The machine is covered by a 12-month warranty on all com-
ponents excluding electrical and electronic parts as well as
wear parts.
2. MACHINE IDENTIFICATION
2.1 Make and model designation
The identication of the machine and model can be found on
the machine's RATING PLATE and in the accompanying