Rocket DOPPIA 2GR - Introduction; Guideline for Reading the Manual; Storage of the Manual; Methodology for Updating the Instruction Manual

USER'S MANUAL
5 of 28
1. INTRODUCTION
Read this manual carefully in its entirety before using the
machine in order to optimise its performance and operate it
safely.
The espresso machine you have purchased has been de-
signed and built using innovative methods and technologies
that ensure quality and reliability over time.
This Manual is your guide to the advantages gained by choos-
ing our brand. You will nd information on how to optimally
utilise the machine's potential, how to keep it efcient and
what to do in case of difculties.
Before using the machine, read the instructions in
this publication carefully and follow the instructions
carefully. Keep this manual and all enclosed publica-
tions in an accessible and protected place. This document as-
sumes that the current occupational safety and hygiene regula-
tions are observed in the facilities where the machine is
installed.
The manufacturer reserves the right to make any improve-
ments and/or modications to the product. It is guaranteed
that this manual reects the state of the art at the time the
machine was placed on the market.
We would like to take this opportunity to invite you to report
any proposals for improvement of both the product and the
Manual.
1.1 Guideline for reading the Manual
The Manual has been divided into autonomous chapters. The
sequence of the chapters reects the temporal logic of ma-
chine use.
To facilitate the immediacy of understanding the text, terms,
abbreviations and pictograms are used.
The Manual consists of a cover, an index and a series of chap-
ters. Each chapter has its own progressive numbering. At the
foot of the page is the page number.
The start page shows the identication data of the machine,
the end page shows the date and revision of the Instruction
Manual.
Abbreviations
Sec. = Section
Chap. = Chapter
Par. = Paragraph
P. = Page
Fig. = Figure
Tab. = Table
Units of Measurement
The units of measurement used are those indicated by the
International System (SI).
1.2 Storage of the Manual
The Instruction Manual must be kept with care and must ac-
company the machine in all changes of ownership that it may
undergo during its life.
Storage should be aided by handling it carefully, with clean
hands and not by placing it on dirty surfaces. No parts must
be removed, torn off or arbitrarily altered.
The Manual should be stored in an environment protected
from humidity and heat and in the vicinity of the machine to
which it refers.
The manufacturer can provide additional copies of the ma-
chine's instruction manual at the user's request.
1.3 Methodology for updating the In-
struction Manual
The manufacturer reserves the right to modify and improve
the machine without giving notice and without updating the
manual already delivered to the user.
If the manual should become illegible or other-
wise difcult to consult, the user is obliged to re-
quest a new copy from the manufacturer before
carrying out any work on the machine.
IT IS absolutely forbidden to remove or rewrite parts of the
Manual.
The User is obliged to comply properly with the instructions
contained in this Manual.
The manufacturer accepts no liability for any problems aris-
ing from the incorrect use of these recommendations.
This manual is also available on the manufacturer's website
on the cover of the manual.
1.4 Recipients
This Manual is addressed to the User.
Qualication of machine recipients
The machine is intended for professional and non-general
use, so its use should be entrusted to qualied persons, in par-
ticular who:
• have reached the age of majority;
• Are physically and mentally t to operate the machine;
• Are able to understand and interpret the Instruction Man-
ual and safety instructions;
• Are familiar with safety procedures and their implementa-
tion;
• Are capable of using the machine;
• Have understood the operating procedures dened by the
machine manufacturer.