Rocket DOPPIA 2GR - Pre-Infusion; Date and Time; Calendar; Language Setting

USER'S MANUAL
16 of 28
• press and hold to enter the coffee boiler item;
• set the boiler temperature (values from 80° to 100°) using
the buttons
and ;
• To exit, press
, the parameters entered are automati-
cally saved.
7.4 Pre-infusion
This menu allows the pre-infusion duration to be set in the
groups via the solenoid valve.
• Enter programming and scroll through the menu until the
display highlights:
preinfusion 0.0
• press and hold to enter the pre-infusion item;
• set values using the buttons
and ;
• To exit, press
, the parameters entered are automati-
cally saved.
The set time controls all groups of the machine.
7.5 Date and time
This menu allows you to change the time, date and day of
the week:
• Enter programming and scroll through the menu until the
display highlights:
date and time
• press and hold to enter the date and time entry;
Date and time
date: / /
time: :
• set values using the buttons
and ;
• to move on to the next parameter, press ;
• To validate the parameters entered and move on to the
next programming step, press
.
7.6 Calendar
This menu allows to program the machine's working hours
and days.
• Enter programming and scroll through the menu until the
display highlights:
calendar
• press and hold to enter the calendar entry;
• In the example below the machine is active from 8 a.m.
to 8 p.m. from Monday to Friday, outside these hours the
machine goes into stand-by mode;
Calendar
on: 08:00 •• off: 20:00
Monday on
Tuesday on
Wednesday on
Thursday on
Friday on
Saturday off
Sunday off
• Use
to move between the various parameters and
change them using the
and buttons;
IS still possible to operate the machine manu-
ally even on days and times when it is on
stand-by.
7.7 Language Setting
This menu allows you to set the language in which messages
are shown on the display:
• Enter programming and scroll through the menu until the
display highlights:
language
• Select the desired language using ;
Language
italiano
english
français
deutsch
• To validate the parameters entered and move on to the
next programming step, press
.