Publication 2711C-UM001C-EN-P - September 2009 113
PanelView Component Emulator Appendix C
Windows Start Menu
The PanelView Component emulator installer creates entries in the
Windows Start Menu that can be used to launch a specific emulated
terminal type. There is also a shortcut named Applications which is
simply a shortcut to the Mapped Share folder. The shortcuts are
installed for all users.
Using the Emulator
The emulator lets you create applications without being connected to
a terminal.
By default anytime you create/save an application on emulator, it goes
to the mapped share folder.
Anything you pull into internal storage on the emulator (fonts,
graphics) has to be Flash Saved for it to be permanently stored in
emulator. Otherwise, it’s lost once you shut down. To save to internal
storage, select Flash and then Save from the Emulator’s main window
menu.
On the emulator do not change terminal communication settings,
otherwise you need to uninstall and install the emulator and the data
will be lost.
Follow defaults when installing the emulator, it sets up the file
structure.
TIP
When using the emulator to create or change applications,
make sure your pop-up blocker is off.
TIP
For more information on working with the emulator, refer to the
context-sensitive help.
To Next Page
Loading...
Need help?
General
