Publication 2711C-UM001C-EN-P - September 2009 97
Appendix
B
Adding Font Files
Available Fonts
These fonts reside on the terminal in the firmware image.
• Arial
• Courier New
• Tahoma
• Asian Font (Simsun - Simplified Chinese)
You can change the Asian Font firmware image from Chinese to
Korean, or Korean to Chinese, by using the firmware upgrade method
described in Chapter 5. The Arial, Courier and Tahoma fonts cannot
be altered.
Additional Windows CE licensed fonts can be added to the terminal.
Windows CE licensed fonts are distributed on the PanelView
Component Accessory CD or can be downloaded from the PanelView
Component Tech Support website. No other fonts are licensed for use
on the terminal.
Import a Font File
You can import a Microsoft Windows CE font to your terminal. Other
font files are not supported.
During the import, the font file is transferred from a USB Flash Drive
or SD card to the internal storage of the terminal. The transfer
operation communicates with the terminal to transfer the file.
You can use the imported font in any application on the terminal.
Follow these steps to add a font to the terminal.
1. Open the PanelView Explorer Startup window.
2. Click File Transfer.
3. Click New Transfer.
4. Select the source location of the Font file, typically My
Computer, and click Next.
TIP
Fonts cannot be exported for copyright reasons.
To Next Page
Loading...
Need help?
General
