Publication 2711C-UM001C-EN-P - September 2009 39
Configuration Mode Chapter 2
Follow these steps to select or change the startup application from the
C200 or C300 terminal.
1. Click Startup Application from the Main menu.
2. Press F1 to reset the startup application.
3. Press F4 to exit to the main menu.
4. Click on File Manager from the main menu.
5. Press F1 to select the source, either internal or USB.
6. Press F3 to go to the list of applications and use the arrows to
select the startup application.
7. Press F3, use the arrow keys to select Set Startup.
8. Press F4 to exit to the main menu.
To Next Page
Loading...
Need help?
General
