128 Rockwell Automation Publication KNX-SG001H-EN-P - December 2020
Kinetix 5300 Single-axis EtherNet/IP Servo Drives
Performance Specifications with Frame 50 Linear Thrusters
Performance specification data and curves reflect nominal system performance of a typical system with the motor at 40 °C (104 °F) and the drive at 50 °C (122 °F) ambient temperature, and
rated line voltage. For additional information on ambient temperature and line conditions, refer to Motion Analyzer.
Linear Thruster
Cat. No.
Velocity, max
230V AC
m/s
System Continuous
Stall Current
A 0-pk
System Continuous
Stall Force
N (lb)
System Peak
Stall Current
A 0-pk
System Peak
Stall Force
N (lb)
Rated Output
230V AC
kW
Kinetix 5300 Drives
(230V AC input)
LDAT-S051010-Dxx 2.8
3.1 119 (27) 11.4 363 (82)
0.31
2198-C1004-ERS
LDAT-S051020-Dxx 3.7 0.38
LDAT-S051030-Dxx 4.1 0.42
LDAT-S051040-Dxx 4.4 0.44
LDAT-S051050-Dxx 4.7 0.46
LDAT-S052010-Dxx 3.7
6.2
251 (56)
22.7
727 (163)
0.79
2198-C1015-ERS
LDAT-S052020-Dxx 4.8 0.97
LDAT-S052030-Dxx
5.0 1.01LDAT-S052040-Dxx
LDAT-S052050-Dxx
LDAT-S052010-Exx
…
LDAT-S052050-Exx
2.6 3.1 11.4 0.50 2198-C1004-ERS
LDAT-S053010-Dxx 4.1
9.4
378 (85)
34.2
1093 (246)
1.31
2198-C1015-ERS
(1)
(1) Rated peak stall-torque is specified with three-phase operation. To achieve rated peak stall-torque performance with single-phase operation, use a catalog number 2198-C1020-ERS.
LDAT-S053020-Dxx 5.0 1.53
LDAT-S053030-Dxx
…
LDAT-S053050-Dxx
5.0 1.53
LDAT-S053010-Exx
…
LDAT-S053050-Exx
1.7 3.1 11.4 0.47 2198-C1004-ERS
LDAT-S054010-Dxx 4.4
12.4
509 (114)
45.5
1453 (327)
1.87
2198-C1020-ERS
LDAT-S054020-Dxx
…
LDAT-S054050-Dxx
5.0 2.05
LDAT-S054010-Exx
…
LDAT-S054050-Exx
2.6 6.2 22.7 1.02 2198-C1015-ERS
To Next Page
Loading...
