Need help?Do you have a question about the Rockwell Automation Allen-Bradley Kinetix 3 2071-AP0 and is the answer not in the manual?
General| Model | 2071-AP0 |
|---|---|
| Type | Servo Drive |
| Communication Protocol | EtherNet/IP |
| Axis | Single-axis |
| Enclosure Rating | IP20 |
| Input Voltage | 100-240 VAC |
| Control Method | Torque, Velocity |
| Continuous Output Current | 5 A |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -40 to 85 °C |
| Humidity | 5 to 95% non-condensing |
Introduces the Kinetix 3 component servo drive, its capabilities, and applications.
Provides step-by-step instructions for physically mounting the Kinetix 3 drive unit.
Identifies and describes the physical connectors and status indicators on the Kinetix 3 drive.
Covers fundamental principles and requirements for safely and correctly wiring the Kinetix 3 drive.
Explains essential grounding procedures for safety and proper operation of Kinetix 3 drives.
Provides instructions for setting up USB communication with PC using Connected Components Workbench.
Essential safety precautions to follow when troubleshooting the Kinetix 3 drive.
Provides general guidance and methods for troubleshooting Kinetix 3 drive issues.
Lists and explains error codes to help resolve drive anomalies and faults.
Details the error display messages and their corresponding causes and solutions.
To Next Page