10 Rockwell Automation Publication 2071-UM001E-EN-P - November 2013
Preface
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellatuomation.com/literature
. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Resource Description
Kinetix 3 Component Servo Drive Installation Instructions, publication 2071-IN001 Information on installing your Kinetix 3 drive system.
Kinetix 3 I/O Breakout Board Installation Instructions,
publication 2071-IN002
Information on installing and wiring the Kinetix 3 I/O breakout board.
Kinetix 3 Feedback Breakout Board Installation Instructions,
publication 2071-IN003
Information on installing and wiring the Kinetix 3 feedback breakout board.
Serial Communication Cables Installation Instructions, publication 2090-IN019 Information on installing and schematics for the serial communication cables
used with Kinetix 3 drive.
MicroLogix 1100 Programmable Controllers User Manual,
publication 1763-UM001
Information on how to install, wire, and troubleshoot your controller.
MicroLogix 1400 Programmable Controllers User Manual,
publication 1766-UM001
Micro830™ and Micro850™ Programmable Controllers User Manual, publication 2080-UM002
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation™ industrial
system.
Kinetix 3 Component Servo Drive Serial Host Command Reference Manual, publication 2071-
RM001
Information on the serial communication commands, both ASCII and ModBus-
RTU, for interfacing a motion controller with the Kinetix 3 drive.
Micro800 and Connected Components Workbench Getting Started Guide, publication 2080-QR001 Provides information on basic Micro800™ controller and Connected Components
Workbench software functions.
Micro800 and Connected Components Workbench Application Guide, publication 2080-QR002 Provides procedures for completing basic tasks in Connected Components
Workbench software and for using Connected Components Workbench software
with component-class products.
Ultraware Software User Manual, publication 2098-UM001
Information on Ultraware software used to configure and operate Kinetix 3
drives, or when designing, testing or running C language programs or cam
tables on these drives.
System Design for Control of Electrical Noise Reference Manual,
publication GMC-RM001
Information, examples, and techniques designed to minimize system failures
caused by electrical noise.
Motion Analyzer CD, download at http://www.ab.com/motion/software/
analyzer_download.html
Drive and motor sizing with application analysis software.
Rockwell Automation Product Certification,
website http://www.rockwellautomation.com/products/certification
For declarations of conformity (DoC) currently available from
Rockwell Automation.
National Electrical Code, published by the National Fire Protection Association of Boston, MA An article on wire sizes and types for grounding electrical equipment.
Rockwell Automation Industrial Automation Glossary, publication AG-7.1 A glossary of industrial automation terms and abbreviations.
To Next Page
Loading...
Need help?
General
