Rockwell Automation Allen-Bradley Micro830 User Manual

100 Rockwell Automation Publication 2080-UM002N-EN-E - November 2022
Chapter 6 Micro870 Controller Distributed Network Protocol
Once the Data Set Prototypes and Descriptors are configured in the DNP3 Slave setting page of
Connected Components Workbench software version 20.01.00 or later, you can see the DNP3
Descriptor DSX and Prototype PTYPX under the respective DNP3 Data Set branch, where X is
the element numbers of each Prototype or Descriptor.
For DNP3 PTYPX, you can configure the controller to construct the Data Set Prototype objects.

Rockwell Automation Allen-Bradley Micro830 Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley Micro830
Category	Controller
Language	English