Rockwell Automation Allen-Bradley PanelView Plus Series User Manual

Publication 2711P-UM001D-EN-P - September 2005
Transfer files and Upgrade Firmware 7-3
3. From the Firmware source folder list, select the location of the
firmware files. The default location is C:\Program
Files\Rockwell Software\RSView Enterprise\FUPs.
From the Upgrade firmware version list, select the version of the
firmware you want to upgrade to, then press Next.
4. Select the appropriate KEPServer drivers and press Next. If no
KEPServer drivers are needed, just press Next.
TIP
If the selected FUP file does not support the
KEPServer drivers, this dialog will not appear.

Rockwell Automation Allen-Bradley PanelView Plus Series Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PanelView Plus Series
Category	Touch terminals
Language	English