Rockwell Automation Logix 5000 Series - Page 19

Chapter 1 Store and Load a Project By Using a
Memory Card
Rockwell Automation Publication 1756-PM017J-EN-P - March 2022 19
5. At the bottom of the Image in Nonvolatile Memory area, select
Load -->.
A dialog box asks you to confirm the load.
6. To load the project from the memory card, select Yes.
The table describes the events that occur for these memory cards.
Logix Designer application goes offline.
When the load is finished, you remain offline.
If using
And the load
Then the OK status indicators display
CompactFlash Card
Does not include
firmware
Solid red> solid green
Includes firmware Flashing red> solid red> solid green
SD Card Does not include
firmware
OK status indicator is solid green; SD status
indicator flashes green.
Status Display shows LOAD . See the illustration.
Includes firmware OK status indicator flashes red; SD status
indicator flashes green.
Status Display shows UPDT . See the illustration.