74 of 136
43. The Pending Changes step is next, and last. The purpose of this step is to verify all of the changes you made in the
wizard, and then apply the changes to the drive. The below screen is for your reference, and there may be some
differences between your actual screen and the one shown.
Click Finish >>. The wizard will write your changes to the drive.
Note: The Pending Changes step can be used a reference tool. You can print the summary with the print button
at the bottom of the window. You can refer to the printed summary when commissioning duplicate drives or
replacing a faulted drive.
44. Use your configured inputs to spin the motor.
To Next Page
Loading...
