Rocky Mountain Element - Chain Stay Protector; Seat Stay Protector

12
3.3 Chain Stay Protector
1) Clean drive-side chain stay with isopropyl
alcohol and a clean rag.
2) With the Chain Stay Protector
(3707001) aligned on the chain stay;
mark the leading edge with masking
tape, to use as an installation guide.
3) Remove backing paper from Chain Stay
Protector, and using the masking tape
guide, install the protector on the chain
stay.
Press and hold the Chain Stay Protector
firmly, to ensure proper adhesion.
4) Remove masking tape guide, and
clean any residue with isopropyl
alcohol and a clean rag.
3.4 Seat Stay Protector
1) Clean drive-side seat stay with isopropyl
alcohol and a clean rag.
2) With the Seat Stay Protector
(3708003) aligned on the seat
stay; mark the leading edge
with masking tape, to use as an
installation guide.
3) Remove backing paper from Seat Stay
Protector, and using the masking tape guide,
install the protector on the chain stay.
Press and hold the Seat Stay Protector firmly,
to ensure proper adhesion.
4) Remove masking tape guide,
and clean any residue with
isopropyl alcohol and a clean
rag.