Rocky Mountain Element - Cable Routing

14
5) Cable Routing
5.1 Internal Cable Noise Damping Hose
We recommend our riders install our Foam Tubes to damp cable noise within the frame.
Note: Only the one cable is shown in this image for clarity.
1) Pour isopropyl alcohol
down Foam Tube to
lubricate foam tube.
Foam Tube for 4mm
Housing (3337001).
Foam Tube for 5mm
Housing (3337002).
2) Slide one Foam Tube over each internal cable, prior to
routing cables through frame.
Note: The Foam Tubes do not fit through either the
head tube or down tube cable ports.