This feature's name is derived from the ancient term "Basso Continuo," meaning thoroughbass.
When this piston is pressed, the indicatror will light. Any stops or couplers on in the Pedal Division
will sound from
the
lowest key being played on the Great manual. This provides a pedal bass
without having to actually play the pedalboard with the feet.
In its normal setting, the BASS coupler affects keys 1 through
24
of
the Great manual, but its
range is programmable.
ea, How
To
Set
The
Range
Of
The
Bass
Coupler:
1 Hold SET
and
press the BASS coupler, whose indicator will start flashing.
2 Release
the
SET
piston and the BASS coupler.
3 While the BASS piston indicator is flashing, press a key which
conesponds to the highest note
the range is to extend. Any note from key 1 to key 32 may
be
selected. After the selected key
has been pressed, the BASS piston indicator will stop flashing
Note:
When
a key is pressed
to
set the range, no sound will be heard even
if
stops are on, so
no disturbance will be made
if
programming during a performance. This setting is not saved
into combination memory.
8
To Next Page
Loading...
