When the MELODY coupler
is
pressed, its indicator will light. Any stop or coupler
of
the Swell
Division will sound from the highest key being played on the Great manual. This allows a solo
melody and an accompaniment to be played from the same manual.
In its normal setting, the MELODY coupler affects keys
25
through
61
on the Great manual, but
its range is programmable.
ea..
How
To Set The Range
Of
The Melody Coupler:
1.
Hold SET and press the MELODY coupler, whose indicator starts flashing.
2. Release the SET piston and MELODY coupler.
3.
While the MELODY coupler indicator is flashing, press a key which corresponds to the
lowest note
of
the desired range. Any note from key 1 to key
61
may be selected. After the
selected key has been pressed, the MELODY coupler indicator will stop flashing.
Note: This setting is not saved into combination memory.
9
To Next Page
Loading...
