Trying Out the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
61Getting Started 1330.8073.02 ─ 03
2. On the "New Channel" tab of the "Signal + Spectrum Mode" dialog box, tap
the "Spectrum" button.
Figure 6-5: Adding a new measurement channel
3. Change the frequency range for this spectrum display:
In the "Frequency" dialog box, set the center frequency to 500
MHz and the
span to 1
GHz.
Activating Additional Measurement Channels
To Next Page
Loading...
