Trying Out the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
62Getting Started 1330.8073.02 ─ 03
Figure 6-6: Frequency spectrum of the calibration signal with a larger span
4. Repeat the previous steps to activate a third Spectrum window.
Change the frequency range for this spectrum display:
In the "Frequency" dialog box, set the center frequency to 64
MHz and tap
"Zero Span".
As the calibration signal does not vary over time, the level versus time dia-
gram displays a straight line.
Activating Additional Measurement Channels
To Next Page
Loading...
