Rohde & Schwarz NRP-Z11 - Page 73

R&S NRP-Z11/21/31/41/61/211/221 Remote Control - Commands
1137.7470.12 6.33 E-7
Command Parameter Unit Default setting Page
SENSe:TRACe:OFFSet:TIME[?] – (<TRIGger:DELay> + 0.005) to
100.0
s 0.0 6.19
SENSe:TRACe:POINts[?] 1 to 1024 100 6.20
SENSe:TRACe:REALtime[?] OFF | ON OFF 6.20
SENSe:TRACe:TIME[?] 0.0001 to 0.3 s 0.01 6.20
SYSTem Commands
SYSTem:INFO? [Item] 6.21
SYSTem:INITialize 6.23
SYSTem:MINPower? W 6.23
SYSTem:RUTime 0.0 … 10.0 s 0.1 6.23
SYSTem:SUTime 0.0 … 10.0 s 0.0001 6.24
SYSTem:TRANsaction:BEGin 6.23
SYSTem:TRANsaction:END 6.24
Test Commands
TEST:SENSor? 6.25
Triggersystem Commands
ABORt 6.26
INITiate:CONTinuous[?] OFF | ON OFF 6.26
INITiate:IMMediate 6.27
TRIGger:ATRigger:STATe[?] OFF | ON OFF 6.27
TRIGger:COUNt[?] 1 to 2
31
1 6.27
TRIGger:DELay[?] x to 100.0 s 0.0 6.28
TRIGger:DELay:AUTO[?] OFF | ON OFF 6.28
TRIGger:HOLDoff[?] 0.0 to 10.0 s 0.0 6.28
TRIGger:HYSTeresis[?] 0.0 to 10.0 dB 0.0 6.29
TRIGger:IMMediate 6.29
TRIGger:LEVel[?] x to y W
10 × x
6.29
TRIGger:SLOPe[?] POSitive | NEGative POSitive 6.29