R&S ZVB Spare Parts
1145.1078.82 5.1 E-4
5 Documents
This chapter contains the spare parts list and the documents for the complete R&S ZVA unit. For gene-
ral information about spare parts for our products please refer to the sheet “Procedure in Case of Servi-
ce and Ordering of Spare Parts” at the beginning of this manual.
Spare Parts
The stock numbers necessary for ordering replacement parts and modules can be found in the compo-
nent lists further down.
DANGER Danger of shock hazard
For module replacement, ensure that the instrument is switched off and discon-
nected from the power supply by removing the plug from the AC and DC power
connector.
Read all safety instructions at the beginning of this manual carefully before mod-
ule replacement!
Available Power Cables
Table 5-1 List of power cables available
Stock No. Earthed-contact connector Preferably used in
DS 0006.7013.00 BS1363: 1967' 10 A 250 V
complying with IEC 83: 1975 standard B2
Great Britain
DS 0006.7020.00 Type 12 , 10 A 250 V
complying with SEV-regulation 1011.1059,
standard sheet S 24 507
Switzerland
DS 0006.7036.00 Type 498/13 10 A 250 V
complying with US-regulation UL 498,
or with IEC 83
USA/Canada
DS 0041.4752.00 GB2099 , GB1002 10 A 250 V
approvals CCC
China
DS 0041.6232.00 JIS C 8303 7A 125V AC
approvals PSE (JET)
Japan
DS 0006.7107.00 Type SAA3 10 A, 250 V,
complying with AS C112-1964 Ap.
Australia
DS 0025.2365.00
DS 0086.4400.00
DIN 49 441, 10 A, 250 V, straight
approvals VDE,ÖVE,CEBEC,KEMA,S,D,N,FI,LCIE,IMQ,UCIEE
DIN 49 441, 10 A, 250 V, angular
approvals VDE,ÖVE,CEBEC,KEMA,S,D,N,FI,LCIE,IMQ,UCIEE
Europe (except Switzerland)
To Next Page
Loading...
