Roidmi SDJ12RM - Disassembly and Cleaning of Side Brush; Disassembly and Cleaning of the Two-In-One Water Tank and Filter

Disassembly and cleaning of side brush
Step 1: Disassemble the side brush
Turn the main unit over, use a screwdriver to remove the screws, and take out the side brush;
Step 2: Clean the side brush
Use a cleaning brush to pick up and cut off the hair and fibre aached to the side brush, separate
them from the side brush, and clean the surface dirt. It is recommended to replace the side brush
every 3-6 months.
1. Please replace the side brush with an original one to avoid damaging the main unit due to product differences;
2. Please be careful when using a screwdriver to replace the side brush to avoid scratching yourself.
Caution
Disassembly and cleaning of the two-in-one water tank and filter
Step 1: Disassemble the two-in-one water tank
Press the release buon on the two-in-one water tank to take the water tank out;
Step 2: Dump the rubbish in the two-in-one water tank
Open the cover of the two-in-one water tank dust bin and dump the rubbish. Use a cleaning
brush to clean the dust bin;
12
EN