35
Performing with Rhythm Patterns
Changing the Tempo of the Rhythm
Pattern
Here’s how to change the tempo of the rhythm pattern.
MEMO
5 The tempo that you specify here is common with the arpeggio tempo
(p. 30) and the sequencer tempo (p. 82).
5 The tempo value is stored in the scene.
1.
Press the [TEMPO] button.
The TEMPO screen appears.
Menu Explanation
[E5] CLICK If this is on, a click is heard at the specified tempo.
[E6] CLOSE Closes the screen.
2.
Use the [VALUE] dial or the [INC][DEC] buttons
to edit the tempo.
By holding down the [SHIFT] button while you perform this
operation, you can edit the two digits below the decimal point.
MEMO
You can set the tempo by pressing the [TEMPO] button at the desired interval
(“tap tempo”). Press the button at least three times, at quarter-note intervals
of the desired tempo.
Saving the Rhythm Pattern Settings
Settings related to the rhythm pattern, such as the currently
selected rhythm pattern group, drum kit settings, KEY TRIGGER
settings, and tempo etc. are stored together in the current scene. If
you want to keep these settings, save the scene (p. 44).
To Next Page
Loading...
