81
Playing Pattern
1.
Select a scene.
Select a scene in which patterns have been created.
Scenes in which patterns have been created have a “PTN”
indication as shown in the illustration.
2.
Press the [PATTERN] button.
The PATTERN screen appears.
About the PATTERN screen
8Tr View
Tone informationPattern information
Pattern number
Track number
Target pattern
Tr 1-8/9-16 View
16Tr View
16Tr View
Target pattern
Track Num/Icon
16Tr View
A box (pattern box) in which a phrase is recorded is shown in
color.
In the PATTERN screen you can use the following functions.
Menu Explanation
[E1] LOOP SETTING Accesses the LOOP SETTING screen.
[E2] PTN UTILITY Accesses the PTN UTILITY screen.
[E3] MUTE Accesses the MUTE screen.
[E4] SOLO Accesses the SOLO screen.
[E5] GROUPING Accesses the GROUPING screen.
[E6] GROUP Accesses the GROUP screen.
<Tr 1-8/9-16 View> Switches the tracks that are shown (tracks 1-8/9-16).
<16Tr View>
If this is on, all 16 tracks are shown in a single
screen.
<TRACK NUM/ICON>
Switches the information that is displayed (track
number or instrument icon) when the 16Tr View is
shown.
Play-standby
If you long-touch an already-recorded pattern box in a track,
the pattern box changes to be highlighted. This indicates play-
standby, meaning that it will play when you press the [APLAY]
button. Only one pattern box in each track can be set to play-
standby. The pattern that is in this play-standby mode is called
the current pattern.
Exist Data
Play standby
Exist Data
Playing
Exist Data
Loop Sw Off
Exist Data
(Color Selectable)
Empty
Pattern name
Of the total of four measures the
first measure is now playing
3.
Press the [APLAY] button.
Each track’s pattern that’s in play-standby mode will play.
5 If you touch a pattern box that’s not playing, the pattern you touch is
played.
5 By directly touching a colored pattern box in the screen, you can switch
patterns for each track.
4.
If you press the [9STOP] button, pattern
playback stops for all tracks.
5 If you touch a pattern box that’s playing, only the pattern that you
touched stops.
5 If you switch or stop/start patterns while another pattern is playing,
the change automatically happens at measure boundaries of the other
playing pattern.
Playing the Sequencer
To Next Page
Loading...
Need help?
General
